Tabs

Introduction

Some schemas can be long and complex. You may want to use tabs to reduce the number of components that are visible at once:

use Filament\Schemas\Components\Tabs;
use Filament\Schemas\Components\Tabs\Tab;

Tabs::make('Tabs')
    ->tabs([
        Tab::make('Tab 1')
            ->schema([
                // ...
            ]),
        Tab::make('Tab 2')
            ->schema([
                // ...
            ]),
        Tab::make('Tab 3')
            ->schema([
                // ...
            ]),
    ])

As well as allowing a static value, the make() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.

Navigating tabs using the keyboard

You can use Tab to enter the tab headers, then the left and right arrow keys to move focus between available tabs. Home and End focus the first and last available tabs. For vertical tabs, use the up and down arrow keys instead. Moving focus does not change the selected tab; press Enter or Space to select it. Press Tab again to continue to the selected panel.

Hidden tabs and disabled header buttons are skipped. Calling disabled() on a Tab disables its fields, not its header, so you can still open a read-only tab.

Tab headers are linked to their panels using accessible IDs. If you set custom id() values, keep them unique across the page. Use distinct keys for separate tabsets, including nested tabsets with the same tab labels.

Setting the default active tab

The first tab will be open by default. You can change the default open tab using the activeTab() method:

use Filament\Schemas\Components\Tabs;
use Filament\Schemas\Components\Tabs\Tab;

Tabs::make('Tabs')
    ->tabs([
        Tab::make('Tab 1')
            ->schema([
                // ...
            ]),
        Tab::make('Tab 2')
            ->schema([
                // ...
            ]),
        Tab::make('Tab 3')
            ->schema([
                // ...
            ]),
    ])
    ->activeTab(2)

As well as allowing a static value, the activeTab() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.

Setting a tab icon

Tabs may have an icon, which you can set using the icon() method:

use Filament\Schemas\Components\Tabs;
use Filament\Schemas\Components\Tabs\Tab;
use Filament\Support\Icons\Heroicon;

Tabs::make('Tabs')
    ->tabs([
        Tab::make('Notifications')
            ->icon(Heroicon::Bell)
            ->schema([
                // ...
            ]),
        // ...
    ])

As well as allowing a static value, the icon() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.

Setting the tab icon position

The icon of the tab may be positioned before or after the label using the iconPosition() method:

use Filament\Schemas\Components\Tabs;
use Filament\Schemas\Components\Tabs\Tab;
use Filament\Support\Enums\IconPosition;
use Filament\Support\Icons\Heroicon;

Tabs::make('Tabs')
    ->tabs([
        Tab::make('Notifications')
            ->icon(Heroicon::Bell)
            ->iconPosition(IconPosition::After)
            ->schema([
                // ...
            ]),
        // ...
    ])

As well as allowing a static value, the iconPosition() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.

Setting a tab badge

Tabs may have a badge, which you can set using the badge() method:

use Filament\Schemas\Components\Tabs;
use Filament\Schemas\Components\Tabs\Tab;

Tabs::make('Tabs')
    ->tabs([
        Tab::make('Notifications')
            ->badge(5)
            ->schema([
                // ...
            ]),
        // ...
    ])

As well as allowing a static value, the badge() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.

If you'd like to change the color for a badge, you can use the badgeColor() method:

use Filament\Schemas\Components\Tabs;
use Filament\Schemas\Components\Tabs\Tab;

Tabs::make('Tabs')
    ->tabs([
        Tab::make('Notifications')
            ->badge(5)
            ->badgeColor('info')
            ->schema([
                // ...
            ]),
        // ...
    ])

As well as allowing a static value, the badgeColor() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.

Lazy loading tab badges

If you have expensive queries powering your tab badges, the initial page load may be slow. You can lazy load tab badges using the lazyLoadedBadge() method, which will load the badge values asynchronously after the page has rendered:

use Filament\Schemas\Components\Tabs;
use Filament\Schemas\Components\Tabs\Tab;

Tabs::make('Tabs')
    ->key('notifications-tabs')
    ->tabs([
        Tab::make('Notifications')
            ->badge(static fn (): int => Notification::query()->where('unread', true)->count())
            ->lazyLoadedBadge()
            ->schema([
                // ...
            ]),
        // ...
    ])

As well as allowing a static value, the lazyLoadedBadge() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.

While the badges are loading, a small loading indicator will appear in place of each lazy-loaded badge. Once the data is fetched, the loading indicators will be replaced with the actual badge values.

Lazy loading tab content

If the content of a tab is expensive to render, you can pass a Schema object to its schema() method and use lazyLoaded(). The content of the active tab will be loaded when it enters the viewport. The content of an inactive tab will not be loaded until the tab is selected:

use Filament\Forms\Components\TextInput;
use Filament\Schemas\Components\Tabs;
use Filament\Schemas\Components\Tabs\Tab;
use Filament\Schemas\Schema;

Tabs::make('Settings')
    ->key('settingsTabs')
    ->tabs([
        Tab::make('Profile')
            ->key('profileTab')
            ->schema(
                Schema::make()
                    ->components([
                        TextInput::make('name'),
                    ])
                    ->lazyLoaded(),
            ),
        Tab::make('Notifications')
            ->key('notificationsTab')
            ->schema(
                Schema::make()
                    ->components([
                        // ...
                    ])
                    ->lazyLoaded(),
            ),
    ])

Every lazy schema must have a unique key. In this example, the keys on the tabs are inherited by their child schemas, while the key on the Tabs component namespaces them from other tabs in the same schema. You can learn more in the schema overview.

Using grid columns within a tab

You may use the columns() method to customize the grid within the tab:

use Filament\Schemas\Components\Tabs;
use Filament\Schemas\Components\Tabs\Tab;

Tabs::make('Tabs')
    ->tabs([
        Tab::make('Tab 1')
            ->schema([
                // ...
            ])
            ->columns(3),
        // ...
    ])

As well as allowing a static value, the columns() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.

Disabling scrollable tabs

Tabs are rendered horizontally by default, and are scrollable when they exceed the available width.

You may disable scrolling using the scrollable(false) method:

use Filament\Schemas\Components\Tabs;

Tabs::make('Tabs')
    ->tabs([
        // ...
    ])
    ->scrollable(false)

When tabs are not scrollable, the component automatically detects the available width. If not all tabs can fit, a dropdown button will appear. Any tabs that exceed the available width will be grouped inside this dropdown automatically.

The dropdown is a visual presentation of the same tab headers, not a separate menu. Arrow keys, Home, and End navigate all available tabs. Focusing an overflowed tab automatically opens the dropdown and displays that tab's focus indicator. Press Enter or Space to select it; the dropdown remains open while you navigate its tabs. Press Tab to leave the headers and close the dropdown. Escape closes it without changing selection and returns focus to an inline tab, or to the selected panel if every tab is overflowed. You can also click the dropdown button to reveal the overflowed tabs.

Using vertical tabs

You can render the tabs vertically by using the vertical() method:

use Filament\Schemas\Components\Tabs;
use Filament\Schemas\Components\Tabs\Tab;

Tabs::make('Tabs')
    ->tabs([
        Tab::make('Tab 1')
            ->schema([
                // ...
            ]),
        Tab::make('Tab 2')
            ->schema([
                // ...
            ]),
        Tab::make('Tab 3')
            ->schema([
                // ...
            ]),
    ])
    ->vertical()

Optionally, you can pass a boolean value to the vertical() method to control if the tabs should be rendered vertically or not:

use Filament\Schemas\Components\Tabs;

Tabs::make('Tabs')
    ->tabs([
        // ...
    ])
    ->vertical(FeatureFlag::active())

As well as allowing a static value, the vertical() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.

Removing the styled container

By default, tabs and their content are wrapped in a container styled as a card. You may remove the styled container using contained():

use Filament\Schemas\Components\Tabs;
use Filament\Schemas\Components\Tabs\Tab;

Tabs::make('Tabs')
    ->tabs([
        Tab::make('Tab 1')
            ->schema([
                // ...
            ]),
        Tab::make('Tab 2')
            ->schema([
                // ...
            ]),
        Tab::make('Tab 3')
            ->schema([
                // ...
            ]),
    ])
    ->contained(false)

As well as allowing a static value, the contained() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.

Persisting the current tab in the user's session

By default, the current tab is not persisted in the browser's local storage. You can change this behavior using the persistTab() method. You must also pass in a unique id() for the tabs component, to distinguish it from all other sets of tabs in the app. This ID will be used as the key in the local storage to store the current tab:

use Filament\Schemas\Components\Tabs;

Tabs::make('Tabs')
    ->tabs([
        // ...
    ])
    ->persistTab()
    ->id('order-tabs')

Optionally, the persistTab() method accepts a boolean value to control if the active tab should persist or not:

use Filament\Schemas\Components\Tabs;

Tabs::make('Tabs')
    ->tabs([
        // ...
    ])
    ->persistTab(FeatureFlag::active())
    ->id('order-tabs')

As well as allowing static values, the persistTab() and id() methods also accept functions to dynamically calculate them. You can inject various utilities into the function as parameters.

Persisting the current tab in the URL's query string

By default, the current tab is not persisted in the URL's query string. You can change this behavior using the persistTabInQueryString() method:

use Filament\Schemas\Components\Tabs;
use Filament\Schemas\Components\Tabs\Tab;

Tabs::make('Tabs')
    ->tabs([
        Tab::make('Tab 1')
            ->schema([
                // ...
            ]),
        Tab::make('Tab 2')
            ->schema([
                // ...
            ]),
        Tab::make('Tab 3')
            ->schema([
                // ...
            ]),
    ])
    ->persistTabInQueryString()

When enabled, the current tab is persisted in the URL's query string using the tab key. You can change this key by passing it to the persistTabInQueryString() method:

use Filament\Schemas\Components\Tabs;
use Filament\Schemas\Components\Tabs\Tab;

Tabs::make('Tabs')
    ->tabs([
        Tab::make('Tab 1')
            ->schema([
                // ...
            ]),
        Tab::make('Tab 2')
            ->schema([
                // ...
            ]),
        Tab::make('Tab 3')
            ->schema([
                // ...
            ]),
    ])
    ->persistTabInQueryString('settings-tab')

As well as allowing a static value, the persistTabInQueryString() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.

Using tabs without content panels

If your livewireProperty() tabs change a filter instead of showing separate content panels, use tabPanels(false). This renders a labelled group of buttons with a pressed state rather than a tablist. Each button remains reachable using Tab:

use Filament\Schemas\Components\Tabs;
use Filament\Schemas\Components\Tabs\Tab;

Tabs::make('Status')
    ->livewireProperty('activeStatus')
    ->tabPanels(false)
    ->tabs([
        'all' => Tab::make('All'),
        'published' => Tab::make('Published'),
    ])

Resource list filters use this mode automatically. For links that navigate to another page, use the tabs Blade component instead. Navigation links keep their native link behavior and are not schema tab panels.